System information

Reference Guide Crestron 2-Series Control System
128 • 2-Series Control Systems Reference Guide – DOC. 6256A
• W starts on page 148.
• X starts on page 149.
• Z starts on page 149.
Symbols
MESSAGE DEFINITION
~CActiveSocket:
unable to close
socket.
Internal system error. Contact Crestron.
~CTP_ListenSocket:
unable to close
socket.
Internal system error. Contact Crestron.
A
MESSAGE DEFINITION
AddActiveSocket:
Unable to allocate
active socket.
Internal system error. Contact Crestron.
AddEntryToMasterList
: Error allocating new
node.
Internal system error. Contact Crestron.
AddEntryToMasterList
: Node already on list.
An attempt was made to add a duplicate entry to the IP table.
AddGatewayLink:
unable to allocate
gateway link class.
Internal system error. Contact Crestron.
AddListenSocket:
Unable to allocate
Listen socket.
Internal system error. Contact Crestron.
AddListenSocket:
Unable to create
Listen socket.
Internal system error. Contact Crestron.
Analog Ramp
(Bounds Limited)
Symbol/Device#
requires lower/upper
bounds to be from 0
to 65535 or -32768 to
32767
(006D:####:006D)
Since analogs are defined as a 16b number, the range of the ramp
may either be 0 to 65535 if it is treated as an unsigned 16b number,
or -32768 to 32767 if it is treated as a signed analog number. If this
error message is issued, this version of the ramp will NOT perform
any processing in response to transitions on its inputs.
(continued on next page)