System information

Reference Guide Crestron 2-Series Control System
122 • 2-Series Control Systems Reference Guide – DOC. 6256A
2-Series Console Commands (continued)
XGETFILE
Description: This command uses Xmodem to retrieve a file(s) from the system. Wildcards are accepted and can be in
the form of (*file, file, and file).
NOTE: Compact flash directories can only use the standard DOS file wildcards.
Help Menu(s): File, Main
Syntax: XGETfile filespec
Parameters: filespec – ASCII string contains the file name and/or wildcards
Possible Source: RS-232, CTP
Minimum CUZ: 1.001
Processor Group: All Processors
XONXOFF
Description: This command enables/disables the software handshaking on the RS-232 port. If no parameter is entered,
the current state is displayed.
Help Menu(s): System
Syntax: XONxoff [ON | OFF]
Parameters: ON – enables the XON/XOFF handshaking
OFF – disables the XON/XOFF handshaking (default)
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 1.001
Processor Group: All Processors
XPUTFILE
Description: This command uses Xmodem to send a file to the system. All information is retrieved from the file. No
parameters are needed for files created by Crestron tools. Other files require that parameters be used. In
addition, when transferring to compact flash, the parameters are required.
Help Menu(s): File, Main
Syntax: XPUTfile [size date time name]
Parameters: size – size of the file in bytes
date – date of the file (MM-DD-YY)
time – time of the file (HH:MM:SS)
name – name of the file (can include spaces)
Possible Source: RS-232, CTP
Minimum CUZ: 1.001
Processor Group: All Processors