System information

Reference Guide Crestron 2-Series Control System
120 • 2-Series Control Systems Reference Guide – DOC. 6256A
2-Series Console Commands (continued)
UPTIME
Description: This command displays length of time the system has been running since the last reboot.
Help Menu(s): System
Syntax: UPTIME
Parameters: none
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 1.001
Processor Group: All Processors
USERPROGCMD
Description: The User Program Commands symbol receives data entered at the 2-Series console prompt using the
USERPROGCMD command. The syntax of the console command requires double-quotes before and after
the command string. The string may include escape codes such as “\x”.
Help Menu(s): System
Syntax: USERPROGCMD quoted_string
Parameters: quoted_string – a string of characters enclosed in double quotes
Possible Source: RS-232, CTP, Telnet
Minimum CUZ: 3.044
Processor Group: All Processors
USERPASSWORD
Description: This command is used to set the password for user web pages. Before the project web pages (both e-
Control 1 and 2) are served by the processor, the user is prompted with the standard browser login page.
The user should enter “USER” as the user name and the password set with this command.
Help Menu(s): System
Syntax: USERPASSWORD
Parameters: none (user is prompted for password)
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 3.061
Processor Group: Ethernet Processors
VERSION
Description: This command displays firmware version information.
Help Menu(s): Main, System
Syntax: VERsion
Parameters: none
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 1.001
Processor Group: All Processors
WEBINIT
Description: This command sets the main page for the web pages. It looks for a special file, which contains the name of
the default page.
Help Menu(s): Ethernet, System
Syntax: WEBINIT
Parameters: None
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 1.001
Processor Group: All Processors
(continued on next page)