System information

Reference Guide Crestron 2-Series Control System
116 • 2-Series Control Systems Reference Guide – DOC. 6256A
2-Series Console Commands (continued)
SETUP
Description: This command puts the CNX-DVP4/C2N-DVP4DI processor into setup mode.
Help Menu(s): Device
Syntax: SETUP
Parameters: none
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 1.017
Processor Group: Display Processors
SHOWEXTRAERRORS
Description: This command enables the logging extended error messages into the error log. The extended errors are:
• Connection/disconnection of TCP/IP Client and Server
• Connection/disconnection of Gateway nodes
• Connection/disconnection to Console port
• Connection to webserver
• Update requests
Help Menu(s): System
Syntax: SHOWEXTRAerrors [OFF|ON]
Parameters: OFF – disable extended error logging (default)
ON – enable extended error logging
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 3.015
Processor Group: All Processors
SHOWHW
Description: This command displays the current hardware configuration as well as the current Internet settings.
Help Menu(s): Main, System
Syntax: SHOWHW
Parameters: none
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 1.001
Processor Group: All Processors
SHOWPORTMAP
Description: This command displays the portmaps configured for the NAT.
Help Menu(s): Ethernet
Syntax: SHOWPORTMAP
Parameters: none
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 2.004
Processor Group: Dual Ethernet Processors
(continued on next page)