System information

Reference Guide Crestron 2-Series Control System
114 • 2-Series Control Systems Reference Guide – DOC. 6256A
2-Series Console Commands (continued)
SDEBUG
Description: This command monitors packets to/from logic.
Help Menu(s): Main
Syntax: SDEBUG {parameters}
Parameters: Refer to “Appendix E: Super-Debugger Command Listing” on page 152 for command details.
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 3.083
Processor Group: All Processors
SECURECIPPORT
Description: This command specifies the port number to be used for the secure (SSL) CIP interface. It should only be
used in the few cases where there is a conflict. Entering the command without a parameter displays the
current setting.
Help Menu(s): Ethernet
Syntax: SECURECIpport [portnumber]
Parameters: portnumber – port number for secure CIP activity (default = 41796)
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 3.061
Processor Group: Ethernet Processors
SECURECTPPORT
Description: This command specifies the port number to be used for the secure (SSL) CTP console interface. It should
only be used in the few cases where there is a conflict. Entering the command without a parameter displays
the current setting.
Help Menu(s): Ethernet
Syntax: SECURECTpport [portnumber]
Parameters: portnumber – port number for secure CTP console (default = 41797)
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 3.061
Processor Group: Ethernet Processors
SECUREWEBPORT
Description: This command specifies the port number to be used for the secure (SSL) web server. Changing the port can
protect the system from attacks to the well know SSL web server port 443. Entering the command without a
parameter displays the current setting.
Help Menu(s): Ethernet
Syntax: SECUREWEbport [portnumber]
Parameters: portnumber – port number for web server connections (default = 443)
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 3.061
Processor Group: All Processors
(continued on next page)