System information

Crestron 2-Series Control Systems Reference Guide
Reference Guide – DOC. 6256A 2-Series Control Systems • 111
2-Series Console Commands (continued)
PROGRESET
Description: This command reloads and restarts the program.
Help Menu(s): System
Syntax: PROGRESet
Parameters: none
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 1.001
Processor Group: All Processors
PROGUPTIME
Description: This command displays the amount of time the current program has been running.
Help Menu(s): System
Syntax: PROGUPTIME
Parameters: none
Possible Source: RS-232, CTP, Telnet
Minimum CUZ: 3.030
Processor Group: All Processors
RAMFREE
Description: This command displays the space remaining in the ram file system. The ram file system was originally
designated for the storage of temporary files such as decompressed graphic files.
Help Menu(s): File
Syntax: RAMFree
Parameters: none
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 1.001
Processor Group: All Processors
REBOOT
Description: This command causes the system to execute a reboot sequence.
Help Menu(s): Main, System
Syntax: REBOOT
Parameters: none
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 1.001
Processor Group: All Processors
REMDNS
Description: This command removes a Domain Name Service (DNS) server from the list. The system allows up to two
servers to be used. The DNS servers resolve IP addresses associated with a given name. A server is
required if the SIMPL+ email routines refer to the server by name.
Help Menu(s): Ethernet
Syntax: REMDns ip_address
Parameters: ip_address – the Internet Protocol (IP) address of the DNS server in dot decimal format (eg.
255.255.255.255)
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 2.006
Processor Group: Ethernet Processors
(continued on next page)