System information

Reference Guide Crestron 2-Series Control System
106 • 2-Series Control Systems Reference Guide – DOC. 6256A
2-Series Console Commands (continued)
ISDIR
Description: This command checks the specified path to see if it is a directory.
Help Menu(s): Ethernet
Syntax: ISDIR directory
Parameters: directory – string containing the path to check (can be absolute or relative)
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 2.004
Processor Group: All Processors
KILLSOCKET
Description: This command terminates an active TCP console connection. It can be used to reset a connection where the
control system thinks it is connected, but the Viewport does not. If more than one CTP or Telnet console
exists, use the WHO command to determine the IP address of each.
Help Menu(s): Ethernet
Syntax: KILLSOCKET [CTP1 | CTP2 | TELNET1 | TELNET2]
Parameters: CTP1 – terminate the first CTP console
CTP2 – terminate the second CTP console
TELNET1 – terminate the first Telnet console
TELNET2 – terminate the second Telnet console
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 2.004
Processor Group: Ethernet Processors
LISTDNS
Description: This command displays the current list of Domain Name Service (DNS) servers in the processor’s search list.
The system allows up to two servers to be used. The DNS servers resolve IP addresses associated with a
given name.
Help Menu(s): Ethernet
Syntax: LISTDNS
Parameters: none
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 2.006
Processor Group: Ethernet Processors
MAKEDIR
Description: This command creates the specified path on compact flash.
Help Menu(s): Ethernet
Syntax: MAKEDIR directory
Parameters: directory – string containing the path of the directory being created (can be absolute or relative)
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 2.004
Processor Group: Compact Flash Processors
(continued on next page)