System information

Reference Guide Crestron 2-Series Control System
104 • 2-Series Control Systems Reference Guide – DOC. 6256A
2-Series Console Commands (continued)
IPMASK
Description: This command sets the subnet mask for the local area network to which the system is attached. The value is
stored in permanent memory and requires a reboot before it is recognized. Entering the command without a
parameter displays the current setting.
Help Menu(s): Ethernet
Syntax: IPMASK [device_num ip_mask]
Parameters: device_num – indicates device to be set (0 = LanA, 1 = LanB)
ip_mask – the subnet mask of the LAN in dot decimal format (eg. 255.255.0.0). 0.0.0.0 is an invalid entry and
will be rejected.
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 1.001
Processor Group: Ethernet Processors
(continued on next page)