System information

Reference Guide Crestron 2-Series Control System
102 • 2-Series Control Systems Reference Guide – DOC. 6256A
2-Series Console Commands (continued)
HOSTNAME
Description: This command sets the host name of the system. This name is used to register the system with a DNS server.
If no parameter is entered, the current state is displayed. The host name shall be displayed when a TCP
console connection is established. Entering the command without a parameter displays the current setting.
Help Menu(s): Ethernet
Syntax: HOSTname [name]
Parameters: name – ASCII string containing the name of the host in the local domain.
Characters are limited to A-Z, a-z, and ‘-‘. This name is combined to the domain name to uniquely identify the
system to the world (I.e., mysystem.crestron.com). It must be unique to the domain. Host names are case-
insensitive.
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 3.044
Processor Group: Ethernet Processors
I2CERROR
Description: This command enables/disables the logging of errors on the internal I2C bus to the error log. These errors
indicate recovery procedures occurred. The system functions normally even if these errors occur. This
command gives the user the ability to ignore these errors and not turn on the error light. Entering the
command without a parameter displays the current setting.
Help Menu(s): Device
Syntax: I2CERRor [ON | OFF]
Parameters: ON – enables the logging of I2C errors
OFF – disables the logging of I2C errors (default)
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 3.015
Processor Group: All Processors
ICMP
Description: This command can be used to disable a response to the ICMP ping command for the Ethernet port. This
action makes it more difficult to detect the system on the network. If it is disabled, it is also hard to debug
networking problems. Entering the command without a parameter displays the current setting.
Help Menu(s): Ethernet
Syntax: ICMP [ON | OFF]
Parameters: ON – enables response to ICMP pings (default)
OFF – disables response to ICMP pings
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 3.061
Processor Group: Ethernet Processors
INFO
Description: This command prints the various capabilities (or software features) of the firmware.
Help Menu(s): Main, System
Syntax: INFO
Parameters: none
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 1.001
Processor Group: Ethernet Processors
(continued on next page)