System information

Crestron 2-Series Control Systems Reference Guide
Reference Guide – DOC. 6256A 2-Series Control Systems • 101
2-Series Console Commands (continued)
GETCODE
Description: This command retrieves the code necessary for e-Control2 activation. The response of this command should
be sent to Crestron to generate the activation key for the particular system.
Help Menu(s): Ethernet
Syntax: GETCODE
Parameters: none
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 3.015
Processor Group: Ethernet Processors
GETFPLINE
Description: This command displays the information that appears on the PRO2/RACK2 front panel onto the current
console.
Help Menu(s): Device
Syntax: GETFPLAINE [1 | 2]
Parameters: 1 – display the top line of the LCD panel
2 – display the bottom line
No arguments displays both lines
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 3.015
Processor Group: Front Panel Processors
HEAPFREE
Description: This command displays the space remaining in the memory heap, which is primarily for program use. The
maximum amount of space depends on the firmware. This space is the available RAM in the system.
Help Menu(s): File
Syntax: HEAPfree
Parameters: none
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 1.001
Processor Group: All Processors
HELP
Description: This command lists the commands for the console grouped by function.
Help Menu(s): Main
Syntax: HELP [ALL | DEVice | ETHERnet | FILE | SYStem]
Parameters: ALL – shows all the commands for the control system
DEVice – displays commands specific to a control system device
ETHERnet – shows the commands for Ethernet control
FILE – displays the commands for the file system
SYStem – list of general system commands
Possible Source: RS-232, CTP, Telnet
Minimum CUZ: 1.001
Processor Group: All Processors
(continued on next page)