Specifications

Microphone (front): (1) 3-pin mini-XLR, female (behind front panel); input for calibrated
microphone (part of CSSTK Surround Sound Tuning Kit, sold separately)
USB (front): (1) USB Type B female (behind front panel)
USB 1.1 computer console port (cable included)
Displays
(2) 256 x 64 graphic VFDs (Vacuum Fluorescent Displays)
Left display shows source, decoding mode, setup, info, and installer menus
Right display shows volume levels
Both displays can show real-time analog meters or spectrum analyzers
Controls & Indicators
Selection Knob (left): (1) rotary encoder with integral pushbutton, used to navigate and
select various menu options and adjust values
STANDBY: (1) pushbutton and red LED, places PSPHD (and PROAMP if connected) into
“Standby” mode (all outputs turned off)
SOURCE: (1) pushbutton, enters the source selection menu
MODE: (1) pushbutton, enters the decoding mode selection menu
SETUP: (1) pushbutton, enters the compression and equalization setup menu
INFO: (1) pushbutton, enables display of source information
HOME: (1) pushbutton, returns both displays to their default screens showing the current
source and decoding mode (left) and volume (right)
DISPLAY: (1) pushbutton, normally sets the front panel display brightness; pressing
DISPLAY and HOME simultaneously for 5 seconds enters the installer menu
METER: (1) pushbutton, enables dual analog meter display
SPECTRUM: (1) pushbutton, enables dual spectrum analyzer display
LEVEL: (1) pushbutton, enables display of speaker volume levels
AMPLIFIER: (1) pushbutton, enables display of amplifier status (if PROAMP is connected)
Volume Knob (right): (1) rotary encoder with integral pushbutton, turn to adjust master
volume level, press to display master volume level
MUTE: (1) pushbutton and red LED, mutes all outputs
RESET: (1) miniature pushbutton (behind front panel), hardware reset
SETUP (rear): (1) recessed miniature pushbutton and (1) red LED, used for touch-settable
ID (TSID) in conjunction with Crestron Toolbox™ software
Power Requirements
Main Power: 65 Watts @ 100-240 Volts AC, 50/60 Hz
Cresnet Power Usage: none, does not draw Cresnet power
Environmental
Temperature: 41° to 104°F (5° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 225 BTU/Hr
Enclosure
Chassis: Metal, vented sides, ultra-quiet speed-controlled fan cooling
Front Panel: Aluminum with plastic overlay
Mounting: Freestanding or 3U 19-inch rack-mountable (detachable feet and rack ears
included)
Dimensions
Height: 5.74 in (146 mm), 5.19 (132 mm) without feet
Width: 17.28 in (439 mm), 19.0 in (483 mm) with ears
Depth: 14.75 in (375 mm)
Weight
12.0 lb (5.4 kg)
1. Setup of MultEQ XT is highly recommended for optimum system performance. Requires
CSSTK Professional Surround Sound Tuning Kit for setup.
2. HDMI requires an adapter or interface cable to accommodate a DVI or DisplayPort
Multimode signal. CBL-HD-DVI and CBL-DP-HD interface cables available separately.
Audyssey, Audyssey MultEQ, Audyssey Dynamic EQ, and Audyssey Dynamic Volume are
trademarks or registered trademarks of Audyssey Laboratories, Inc. Blu-ray Disc is a
trademark of the Blu-ray Disc Association. Dolby, Dolby Digital, and the double-D symbol
are trademarks or registered trademarks of Dolby Laboratories. DTS is a registered
trademark & the DTS logos and Symbol are trademarks of DTS, Inc. HDMI, the HDMI
Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
Crestron Electronics, Inc. 15 Volvo Drive
l
Rockleigh, NJ 07647
Tel: [phone]
l
Fax: [phone]
www.crestron.com
Specifications subject to change without notice. Doc.4663A 04/10
All brand names, product names and trademarks are the property of their respective owners.
©2010 Crestron Electronics, Inc.
Crestron PROCISE
™
PSPHD High-Definition Professional Surround Sound Processor
PROAMP-7X400
PROCISE™ High-Definition Surround Sound
Amplifier, 7 Channels x 400 Watts
PROAMP-7X250
PROCISE™ High-Definition Surround Sound
Amplifier, 7 Channels x 250 Watts
CBL Series
Crestron® Certified Interface Cables
CSSTK
Surround Sound Tuning Kit
AVAILABLE ACCESSORIES
PSPHD Typical Residential Application