Crestron PAC2M Professional Automation Mini Computer Operations Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2007 Crestron Electronics, Inc.
Crestron PAC2M Professional Automation Mini Computer Contents Professional Automation Mini Computer: PAC2M 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Specifications ..............................................................................................................
Crestron PAC2M Professional Automation Mini Computer Professional Automation Mini Computer: PAC2M Introduction Features and Functions • • • • • • • • • • • • • • • • • * Operations Guide – DOC.
Professional Automation Mini Computer Crestron PAC2M Professional Automation Mini Control System The PAC2M is a compact, low-cost alternative to the PAC2 designed for small lighting and automation applications. At half the size of a PAC2, the PAC2M is perfect for apartments and smaller homes as well as individual meeting rooms and lecture halls.
Crestron PAC2M Professional Automation Mini Computer RoomView® and SNMP For large facilities utilizing multiple PAC2Ms and other control systems, Crestron’s exclusive RoomView Help Desk software delivers a comprehensive solution for remote monitoring and asset management. Also, built-in SNMP support enables similar capability using third-part network management software, allowing full control and monitoring from the IT Help Desk or NOC in a format that is familiar to IT personnel.
Professional Automation Mini Computer Crestron PAC2M Specifications Specifications for the PAC2M are listed in the following table. PAC2M Specifications SPECIFICATION DETAILS Processor CPU 32-bit Freescale Coldfire Microprocessor Processing Speed 66 MIPS (Dhrystone 2.
Crestron PAC2M Professional Automation Mini Computer Physical Description This section provides information on the connections, controls and indicators available on your PAC2M. PAC2M Physical View (Head On) PAC2M Physical View (Angled) Operations Guide – DOC.
Professional Automation Mini Computer Crestron PAC2M PAC2M Overall Dimensions 2 1 3 4 5 7.72 in (19.59 cm) 6.00 in (15.24 cm) 6 7 8 9 6.35 in (16.12 cm) 10 14 7.05 in (17.89 cm) 11 15 12 16 13 17 1.71 in (4.33 cm) 1.56 in (3.94 cm) 6 • Professional Automation Mini Computer: PAC2M Operations Guide – DOC.
Crestron PAC2M Professional Automation Mini Computer Connectors, Controls & Indicators # CONNECTORS*, CONTROLS & INDICATORS DESCRIPTION 1 G/INT/EXT (A – B) (2) 3-pin 3.5 mm detachable terminal blocks; Cresnet power selection connectors for each segment; Connect to external Cresnet power supply or to “internal” power source via jumpers, to power Cresnet devices connected to the NET ports; Maximum load per segment using external supply: 75 Watts (3.
Professional Automation Mini Computer Crestron PAC2M Connectors, Controls & Indicators (Continued) # CONNECTORS*, CONTROLS & INDICATORS 10 PWR LEDs (A – B) Indicates 24 Volts DC power present at the respective segment (A and/or B). 11 NET LEDs (A – B) Indicates communication with Cresnet system by the respective segment (A and/or B). 12 RELAY OUTPUT (1 – 4) 13 INPUT (1 – 4) (1) 5-pin 3.
Crestron PAC2M Professional Automation Mini Computer Industry Compliance This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc. (E174344) As of the date of manufacture, the PAC2M has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. NOTE: This device complies with part 15 of the FCC rules.
Professional Automation Mini Computer Crestron PAC2M Setup Network Wiring When wiring the network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment. • Provide sufficient power to the system. CAUTION: Insufficient power can lead to unpredictable results or damage to the equipment. Please use the Crestron Power Calculator to help calculate how much power is needed for the system (http://www.crestron.com/calculators).
Crestron PAC2M Professional Automation Mini Computer 5940) and CAENIB – Automation Enclosures Installation Guide (Doc. 6562) for more information on the CAEN and CAENIB. The following procedure assumes installation in a double-wide CAEN. Complete the procedure below to attach the PAC2M to the CAEN. A #2 Phillips screwdriver is required. 1.
Professional Automation Mini Computer Crestron PAC2M built-in Cresnet Hub/Repeater) up to a total of 45 Watts. If additional power is needed, Crestron recommends its CNPWS-75 (75 watt) External Power Supply. Installation Ventilation The PAC2M should be used in a well-ventilated area. The venting holes should not be obstructed under any circumstances. If the PAC2M is hot to the touch, consider using forced air ventilation and/or incrementing the spacing between units.
Crestron PAC2M Professional Automation Mini Computer Hardware Connections for the PAC2M POWER: 24 VDC INPUT, PARALLELED WITH 24 VDC JACK G/INT/EXT: 24 VDC TO HUB FROM INTERNAL OR EXTERNAL POWER CRESNET: TO ANY CRESNET NETWORK DEVICE LEFT: TO CLX-(or CLXI-) SERIES LIGHTING CONTROL MODULE RELAY OUTPUT (1 - 4): TO CONTROLLABLE DEVICES 24 VDC 2A MAX: AC POWER PACK (24 VDC, 2A) Operations Guide – DOC.
Professional Automation Mini Computer Crestron PAC2M Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website. To post a question or view questions you have submitted to Crestron’s True Blue Support, log in at http://support.crestron.com. First-time users will need to establish a user account.
Crestron PAC2M Professional Automation Mini Computer As with all Crestron software, D3 Pro provides extensive right-click and drag-anddrop functionality in addition to convenient keyboard shortcuts for frequently used functions and commands. Programming is organized into six system Views of the lighting system, each providing a moveable toolbox of devices such as interfaces, fixtures and control modules.
Professional Automation Mini Computer Crestron PAC2M Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade it is necessary to establish communication. Once communication has been established, files (for example, programs or firmware) can be transferred to the control system (and/or device).
Crestron PAC2M Professional Automation Mini Computer • Enter the IP address, IP mask and default router of the PAC2M via the Crestron Toolbox (Functions | Ethernet Addressing); otherwise enable DHCP. • Confirm Ethernet connections between PAC2M and PC. If connecting through a hub or router, use CAT5 straight through cables with 8-pin RJ-45 connectors. Alternatively, use a CAT5 crossover cable to connect the two LAN ports directly without using a hub or router.
Professional Automation Mini Computer Crestron PAC2M Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. PAC2M Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Unexpected response from control system. Network devices are not communicating with the control system. Use Crestron Toolbox to poll the network.
Crestron PAC2M Professional Automation Mini Computer NOTE: If communication cannot be established or the control system is locked-up, refer to “Troubleshooting Communications” in the Crestron 2-Series Control Systems Reference Guide (Doc. 6256). NOTE: Passthrough Mode enables Viewport access to any serial controlled device on the network. This aids in troubleshooting by allowing direct communication between the PC and a network device (effectively “passing through” the PAC2M).
Professional Automation Mini Computer Crestron PAC2M then select “2-Series Control System Monitor” from the drop down list. Make sure to choose USB as the “Connection Type”, then click OK. The following text will appear in the bottom right corner of the “Text Console” window: usb;device 2SeriesCtrlSystemMonitor The following text will appear in Toolbox: MONITOR> 10. At the Toolbox prompt, type erase and press Enter. The following text will appear in Toolbox: Erasing ->25%->50%->75%->100% Done 11.
Crestron PAC2M Professional Automation Mini Computer Check Network Wiring Use the Right Wire In order to ensure optimum performance over the full range of your installation topology, Crestron Certified Wire and only Crestron Certified Wire may be used. Failure to do so may incur additional charges if support is required to identify performance deficiencies because of using improper wire. Calculate Power CAUTION: Use only Crestron power supplies for Crestron equipment.
Professional Automation Mini Computer Crestron PAC2M Reference Documents The latest version of all documents mentioned within the guide can be obtained from the Crestron website (http://www.crestron.com/manuals). This link will provide a list of product manuals arranged in alphabetical order by model number.
Crestron PAC2M Professional Automation Mini Computer Software License Agreement This License Agreement (“Agreement”) is a legal contract between you (either an individual or a single business entity) and Crestron Electronics, Inc. (“Crestron”) for software referenced in this guide, which includes computer software and as applicable, associated media, printed materials and “online” or electronic documentation (the “Software”).
Professional Automation Mini Computer Crestron PAC2M If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in conformity with Your valid licenses from Crestron of its authorized agent.
Crestron PAC2M Professional Automation Mini Computer Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Professional Automation Mini Computer Crestron PAC2M This page is intentionally left blank. 26 • Professional Automation Mini Computer: PAC2M Operations Guide – DOC.
Crestron PAC2M Professional Automation Mini Computer This page is intentionally left blank. Operations Guide – DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 6507A (2015851) 04.07 Specifications subject to change without notice.
