Specifications

Crestron CEN-IDOCV Interface for Apple
®
iPod
®
with Video
CEN-IDOCV Quick Start
Introduction
The following steps are designed to guide you through the basic hookup,
configuration and use of a CEN-IDOCV. For detailed instructions on installation and
usage, please refer to “Interface for Apple iPod with Video: CEN-IDOCV” on
page 1.
Required Equipment
The following equipment is required to load and run the demo program.
• Power over Ethernet injector such as the Crestron PWE-4803RU.
• CEN-IDOCV Interface for Apple
®
iPod
®
with Video.
• 2-Series control system with CUZ file version 3.155 or later.
• Apple iPod
®
.
1, 2, 3
• USB cable for connecting CEN-IDOCV to PC.
• Optional: ABAR-1 or ABVR-1.
1. For a complete list of supported products, refer to Crestron Online Help Answer ID 4837,
or contact Crestron True Blue Support at www.crestron.com/true_blue_support.
2. Except where noted, this document uses the term “iPod” as a general reference to the
various versions of iPod produced by Apple Computer, Inc.
3. iPod device not included.
Installation
Refer to the following diagrams and connect the CEN-IDOCV in the following
order.
1. Connect AUDIO OUT to a device capable of receiving Crestron Home
®
(CH) audio (i.e. ABAR-1).
AUDIO OUT Port
Operations Guide – DOC. 6761B Interface for Apple
®
iPod
®
with Video: CEN-IDOCV ¥ iii
®
®