Specifications

Crestron CEN-IDOCV Interface for Apple
®
iPod
®
with Video
Setup
Complete the following steps to properly set up and connect the PoE injector. Refer
to the illustration at the conclusion of the procedure.
1. Attach the supplied AC power cord to the IEC 320 connector on the PoE
injector.
2. Insert the other end of the power cord into an active AC receptacle.
3. Using a CAT5 cable, connect the LAN port of the PoE injector to the LAN.
4. Using a CAT5 cable, connect the LAN PoE port of the PoE injector to the
PoE port of an 802.3af-compliant powered device.
PoE Injector Hookup
Operations Guide – DOC. 6761B Interface for Apple
®
iPod
®
with Video: CEN-IDOCV • 25