Specifications

Interface for Apple
®
iPod
®
with Video Crestron CEN-IDOCV
Appendix: PoE Injector – PWE-4803RU
The PWE-4803RU is a PoE (Power over Ethernet) injector that meets IEEE 802.3af
requirements. The PWE-4803RU is designed to power Crestron 802.3af powered
devices such as the CEN-IDOCV. The PWE-4803RU can also power third-party
802.3af powered devices.
NOTE: Only connect this PoE injector to a device that is 802.3af compliant.
Plugging this PoE injector into a device that is not 802.3af compliant could damage
the device or the PoE injector.
Using the PWE-4803RU, a separate power supply at the location of the 802.3af
powered device is not needed. The PWE-4803RU can be mounted at any convenient
location up to 328 feet (100 meters) from the device.
Specifications
Crestron suggests that only this PoE injector be used with designated
802.3af-compliant Crestron products. The specifications for the PWE-4803RU are as
follows.
PWE-4803RU Specifications
SPECIFICATION DETAILS
Output Rating 48 VDC nominal, 0.35 A maximum
Power Requirements 100-250 VAC, 50/60Hz
Environmental
Temperature 32º to 104ºF (0º to 40ºC)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 28 BTU/Hr
Enclosure Black plastic, desktop
Dimensions
Height 1.35 in (3.43 cm)
Width 2.40 in (6.10 cm)
Depth 3.98 in (10.11 cm)
Weight 6.0 oz (168.7 g)
22 • Interface for Apple
®
iPod
®
with Video: CEN-IDOCV Operations Guide – DOC. 6761B