Specifications

Interface for Apple
®
iPod
®
with Video Crestron CEN-IDOCV
For Mac:
1. Open a web browser and go to
www.crestron.com/crestronsync.
2. Click on the appropriate link for the Mac version of Crestron Sync.
3. Click the link to download and install Crestron Sync software. Crestron
Sync will not automatically add itself to Startup. This must be done
manually one time.
4. Configure Crestron Sync:
a. Run the application (Launch the Finder, Go to Applications, then
double-click Crestron Sync icon).
b. Right-click (or Command + left-click) the application icon located in
the Dock.
c. Click Open at Login.
d. If the “Add New Device” window is not automatically displayed upon
starting Crestron Sync for the first time, right-click inside the “Crestron
Sync” window and click Add New Device.
e. Enter a name for the device, i.e., My iPod (This is not the name of the
iPod. It is a reference name to help the user identify the CEN-IDOCV).
If the device name is changed while connected to iTunes, this will
disconnect the iPod. To re-connect, select the device and click Connect
Selected.
f. Enter the IP address of the CEN-IDOCV.
g. Do not select the Automatically Connect check box. This control
allows the user to select the Crestron device connection each time they
start iTunes. If the check box is selected Crestron Sync will connect the
device automatically each time iTunes starts or Crestron Sync starts.
h. Click OK to add the device to the “Crestron Sync” window.
5. To add devices, re-open the “Add New Device” window and configure the
additional devices as described above.
For more information, refer to the latest version of the CEN-IDOCV QuickStart
Guide (Doc. 6794) which is available from the Crestron website or the Crestron Sync
help file.
14 • Interface for Apple
®
iPod
®
with Video: CEN-IDOCV Operations Guide – DOC. 6761B