Installation guide

Crestron MPC-M5 Media Presentation Controller™ M5
Operations & Installation Guide – DOC. 6955B Media Presentation Controller™ M5: MPC-M5  5
MPC-M5 Specifications (Continued)
SPECIFICATION
DETAILS
Available Models
MPC-M5-B-T
MPC Media Presentation Controller
M5, black
MPC-M5-W
MPC Media Presentation Controller
M5, white
Available Accessories
CEN-SW-POE-5
5-Port PoE Switch
CNSP-XX
Custom Serial Interface Cable
GLS Series
Crestron Green Light
®
Occupancy
Sensors
IRP2
IR Emitter Probe
MP/MPC/IPAC_FRONT_LABEL
[BLANK, ENGRAVED]-B-T
Set of custom engravable backlit labels,
white on black
MP/MPC/IPAC_FRONT_LABEL
[BLANK, ENGRAVED]-W
Set of custom engravable backlit labels,
black on white
MP-WP Series
Media Presentation Wall Plates
PWE-4803RU
PoE Injector
1. The internal time clock is reset after any reboot. If accurate time measurement is required, the
MPC-M5 must be synchronized with an external time clock via the SIMPL™ Windows program.
2. The latest software versions can be obtained from the Crestron Web site. Refer to the NOTE
following these footnotes.
3. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
NOTE: Crestron software and any files on the Web site are for authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).