Installation guide

Crestron MPC-M5 Media Presentation Controller™ M5
Operations & Installation Guide – DOC. 6955B Media Presentation Controller™ M5: MPC-M5  15
Input Wiring Diagrams
Detecting a contact
closure from a
switch or relay
G 1 2
24
Detecting a contact
voltage from a
switch or relay
24 VDC Max
G 1 2
24
+
-
Pull-down Resistor:
Enabled*
Crestron
occupancy
sensor
G 1 2
24
Detecting a floating
contact voltage
(e.g. from a
Crestron
occupancy sensor)
* Detection of an occupancy sensor will also invert the SIMPL program logic in that when the circuit is open (motion detected), the digital
signal will be high and when the circuit is closed (no motion detected), the digital signal will be low.
Label the Buttons
Optional custom engraved labels for the MPC-M5 can be ordered separately by
using Crestron Engraver software, available from the Crestron Web site
(www.crestron.com).