Installation guide

Media Presentation Controller™ M5 Crestron MPC-M5
14  Media Presentation Controller™ M5: MPC-M5 Operations & Installation Guide – DOC. 6955B
Hardware Connections for the MPC-M5 (Rear View)
LAN:
10/100BASE-T Ethernet
to LAN or Web
RELAYS:
To Controllable
Devices
I/O:
Inputs From Digital
Devices (and 24 Volt
Power For Sensors)
COM:
To Any
3-Wire RS-232
Device
IR:
To IRP2 or
Serial Devices
Input Connections
Depending on the application, the MPC-M5 inputs can be wired two ways. Refer to
the diagrams on the following page when wiring inputs.
CAUTION: Incorrect wiring may damage the MPC-M5.
NOTE: The settings for the pull-down resistor are specified in the SIMPL Windows
program. For more information, refer to the SIMPL Windows help file.