Installation guide

Media Presentation Controller™ M5 Crestron MPC-M5
8  Media Presentation Controller™ M5: MPC-M5 Operations & Installation Guide – DOC. 6955B
Connectors, Controls & Indicators
#
CONNECTORS,
CONTROLS &
INDICATORS
DESCRIPTION
1
IR RECEIVER
Receives signals from IR transmitter
2
FEEDBACK
INDICATORS
(10) Programmable red LEDs (one per hard
key)
3
HARD KEYS
(10) Programmable buttons with backlit
labeling
4
COMPUTER
Pin 2 Pin 3
Pin 1 Pin 4
(1) USB Type B female (behind front cover);
USB 1.1 computer console port
PIN
DESCRIPTION
1
+5 VDC
2
Data -
3
Data +
4
Ground
5
SW-R
(1) Recessed miniature pushbutton (behind
front cover) for software reset (restarts the
SIMPL program)
6
HW-R
(1) Recessed miniature pushbutton for
hardware reset (reboots the processor)
7
LAN PoE
1, 2
ACTIVITY
LED
STATUS
LED
PIN 1
PIN 8
(1) 8-wire RJ-45 with two LED indicators
10/100BASE-T Ethernet port,
802.3af Power over Ethernet compliant
Top green LED indicates Ethernet activity
Bottom green LED indicates link status
PIN
SIGNAL
PIN
SIGNAL
1
RX +
5
N/C
2
RX -
6
TX -
3
TX +
7
N/C
4
N/C
8
N/C
8
COM
(3) Captive screw terminals
Bidirectional RS-232 port
Up to 115.2 k baud
Software handshaking only
PIN
DESCRIPTION
1
Ground
2
TX
3
RX
9
IR
(2) Captive screw terminals
IR/Serial output port
IR output up to 1.2 MHz
1-way serial TTL/RS-232 (0-5 V)
up to 115.2 k baud
PIN
DESCRIPTION
1
Signal
2
Ground
(Continued on following page)