Specifications

Rear display shows distance learning location during video conference.
Article CTSG-037; Version 1; Last Revised 5/21/2012
Lecture Capture Scenario for Cisco Codecs (CTSG-038)
1. The "Record" hard button will be pressed on the touch panel
2. Client will be prompted for a pass code
3. A screen with a Qwerty keyboad will come up asking the client to "Enter your NetID to start
recording:" (the crestron will need to be programmed to add "@video.towson.edu" to the end of
whatever is typed). Paul will follow up with exact command. The command for number 3 will be
"xCommand Dial Number:[e-mail] Protocol:Sip CallRate:4000<LF>" where netid will
replace by keyboard entry.
4. A back button must be present to go back to keyboard screen if something is miss typed.
5. A stop recording button must be available to hang up the call. There must be a confirm dialog box
before actually stopping the recording. The confirmation must use the general design of the message
presented to the user when they press Finish to shut down the system. Use “Are you sure you want to
stop recording?” for the verbiage and include Yes/No buttons, as with the Finish confirmation.
Article CTSG-038; Version 1; Last Revised 6/12/2014