Specifications

3. The serial number must be collected and entered into the TechInfo database
(Settings>General>About)
4. Set Sleep time to “Never” (Settings>General>Sleep)
5. Set Screen Saver to “Never” (Settings>Screen Saver>Start After)
6. Set AirPlay security to “Onscreen Code” (Settings>AirPlay>Security)
7. Turn on Conference room Display (Settings>AirPlay>Conference Room Display)
8. Turn on Restrictions (Settings>General>Restrictions)
o Passcode (set to standard)
o AirPlay Settings (set to “Ask”)
Article CTSG-004; Version 1; Last Revised 4/13/2015
Smart Classroom Computer Configuration Requirements (CTSG-005)
A. Overview
A Smart Classroom computer is primarily used to present information to classes by using a projector and is
shared by multiple faculty. Smart classroom computers are critical to instruction and are configured with
security settings and file management measures to preserve system integrity and assure that the computer runs
consistently at an optimum level of performance. Because many people share the computer, it is different than
a personal computer in an office or home. Personal files must not be stored on this computer but stored on H:\
drives (recommended) or portable media (less reliable). Installation of special software is managed with several
options (listed below) to accommodate faculty needs. Software installed on the computer will be upgraded
regularly in a timely manner that does not disrupt instruction.
Windows-based PCs will be the primary solution, with SMART Podium monitors in new venues where budget
permits.
B. Smart classroom computer standards
1. Configuration is adapted from the existing OTS standard image
2. Computers follow smart classroom Active Directory guidelines