Specifications

Article CTSG-020; Version 1; Last Revised 5/18/2012
Defaults on System Start (CTSG-021)
No Sound active during system start-up and shut down
Mute microphone (“Don’t Use” position) and MP3 by default
Volume at default level (Approximately 55-60 decibels when measured from the center of the room)
Podium computer must be selected as the source (or laptop if no podium computer)
TV must be tuned to CNN unless stated otherwise
All buttons (Hard and soft) must be locked out during the startup and shut down of the system.
Date and time in lower right hand corner must be in the following format on all pages: July 18, 2012 12:00 (make
sure text box is large enough to accommodate September). Time must be synced with the network.
Crestron Touch Panel screen must not go to sleep while system is on
Article CTSG-021; Version 1; Last Revised 11/12/2012
Source Page (CTSG-022)
The Source Page must be laid out like the example below in the exact order pictured. If the podium computer
had dual monitors, a “Secondary Monitor” Button must be placed directly below the “Computer” button to
allow either image to be shown to any display in the room. There must always be an “Auxiliary HDMI” Button
separate from the “Laptop” (VGA) button. All other sources must be hidden unless present in the system. This
includes dual display options if dual image is not available. Image Adjust side button must be hidden on digital
sources where no adjustments are possible (i.e. HDMI, DVI, other fully digital sources). Fully digital systems (i.e.
Crestron DMP- 300) will not have image adjust options available on any source. Left and right image source list
must mirror each other (button must be blacked out on opposite source list when selected). On rooms with
single source display, “Clear” button must be removed.
Left and right image must be stage left and stage right, meaning the instructor’s left and right while facing the
students. (http://plays.about.com/od/basics/ss/stageright.htm)