Specifications

e. Finish – Press to turn system off
f. Microphones – Press to select whether to use microphones
g. Volume – Press to change the volume of the system
h. Record – Press to begin a recording session if the room is equipped with lecture capture
i. Video Conf. – Press to bring up Video Conferencing Page
j. No Show – Press to temporary stop sending image to projector
k. No Sound – Press to temporarily mute the system
B. Hard buttons must display a “feature not available” message if not applicable to the room. See
“Recording Control Page” for rooms without cameras in Appendix A.
C. Pressing any hard button (or the screen itself) must wake the screen if the touch panel is in sleep mode
D. For the TSW-750 Touch Panel, the hard buttons must control the following functions:
a. Power Button = emulate the START/FINISH buttons
b. Home Button = Emulate the SOURCE button
c. Light Button = Display “feature not available” message
d. Arrow Up = Main volume up
e. Arrow Down = Main volume down
Article CTSG-019; Version 1; Last Revised 1/29/2014
Soft Buttons (CTSG-020)
Please see Appendix A