Specifications

2. Document cameras
a. Sticker must be placed on (WV VZ-3 specific)
i. On the back of the arm
ii. On the plate that connects the base to the arm.
1. Stickers must not be placed on the white base
3. Computer – computers include class and lab computers as well as iPad’s purchased with STF
a. Stickers must be placed on
i. The front
1. Stickers placed on the front must not cover any buttons or lights
ii. The top near the TU tag
4. Processor in rack
a. Sticker must be placed on the front of the DMPS-300C - this is to identify the entire rack
5. Podium, wedge/TPS-6L in particular
a. Sticker must be placed on
i. Front base
ii. Side
iii. Back
6. Cameras
D. Stickers must be affixed during QA before photos are taken so they show in the Virtual Tour.
E. After a room is tagged it will be marked as such in COLLECTIONS in the Virtual Tour.
Article CTSG-007; Version 1; Last Revised 6/12/2014
Distance Learning & Lecture Capture
Standard Equipment (CTSG-008)
Towson University has been moving towards a software based distance learning & lecture capture model.
Depending on the room this will either include USB cameras/microphones or a bridge to convert standard
camera/microphones to a format that can be connected to the computer in the room.
Cameras must be mounted roughly 96” above finished floor.
Flat panel displays must be mounted roughly 7’ above finished floor.
Basic Setup
Basic/portable recording can be accomplished in any room with a webcam plugged into the instructor’s PC, TU
recommended models can be found here:
http://www.towson.edu/adminfinance/ots/hardwaresoftware/facultystaff/hwrecommended.asp#Webcams
A Revo Labs wireless USB mic can be added to this setup for more flexible instructor micing. To capture
omnidirectional sound, products are available from Blue and Acoustic Magic to capture the entire room audio.
Permanent Setup