Specifications

Crestron C2N-MNETRPT infiNET™ Repeater
Specifications
Specifications for the C2N-MNETRPT are listed in the following table.
C2N-MNETRPT Specifications
SPECIFICATION DETAILS
RF Transceiver Two-way RF, 2.4 GHz ISM
Channels 11-26 (2400 to 2483.6
MHz), IEEE 802.15.4 compliant
RF Transmitting Power 10 mW
Range (typical)
1
150 feet indoor, 250 feet outdoor,
subject to site-specific conditions;
Effective range is increased by
adding additional infiNET devices
or C2N-MNETRPT repeaters
Power Requirements 6 Watts
(0.5 Amp @ 12 Volts DC);
AC power supply included
Minimum 2-Series Control
System Update File
2, 3
Version 3.154 or later
Default MNET ID 01
4
Enclosure Black metal, freestanding
Dimensions
(without antenna)
Height
Width
Depth
1.24 in (3.15 cm)
2.47 in (6.28 cm)
3.88 in (9.85 cm)
Weight 8.3 oz (0.24 kg)
1. The location of the transceiver and the orientation of the antenna are important
factors in determining the RF performance. With the unit located outside of any
metal enclosures, the antenna can be adjusted to achieve the best range. The range
is dependent on its placement and the building in which it is used. The
construction of the building, obstructions, and RF interference from other devices
are factors determining the effective range of the unit. To prevent unit-to-unit RF
interference, multiple transceivers operating at the same frequencies should not be
installed within three to five feet of each other.
Operations Guide – DOC. 6335A infiNET™ Repeater: C2N-MNETRPT • 3