Specifications

Crestron C2N-MNETRPT infiNET™ Repeater
Problem Solving
Troubleshooting
The following table provides corrective action for possible trouble
situations. If further assistance is required, please contact a Crestron
customer service representative.
C2N-MNETRPT Troubleshooting
TROUBLE POSSIBLE
CAUSE(S)
CORRECTIVE
ACTION
C2N-MNETRPT is
not receiving
power.
Verify that the
included power supply
is properly connected
and providing power.
PWR LED does
not illuminate.
Incorrect power
supply.
Only use the included
power supply.
MNET LED
does not
illuminate.
C2N-MNETRPT is
not acquired with a
C2N-MNETGW.
Acquire
C2N-MNETRPT with a
C2N-MNETGW.
SETUP LED
does not
illuminate when
SETUP is
pressed.
C2N-MNETRPT
has just rebooted.
Wait approximately 15
seconds after the
device has rebooted
before pressing
SETUP.
Intermittent
response from
C2N-MNETRPT
during
communication
with infiNET
devices.
C2N-MNETRPT is
located near metal
that is causing
interference.
Verify that large
amounts of metal are
not causing
interference.
Reference Documents
The latest version of all documents mentioned within the guide can be
obtained from the Crestron website (http://www.crestron.com/manuals
).
Operations Guide – DOC. 6335A infiNET™ Repeater: C2N-MNETRPT • 13