Specifications

infiNET™ Repeater Crestron C2N-MNETRPT
Upgrading Firmware
Crestron recommends using the latest programming software and that
each device contains the latest firmware to take advantage of the most
recently released features. However, before attempting to upgrade, the
C2N-MNETRPT must be acquired by the C2N-MNETGW as described
on page 10.
Firmware upgrades are available from the Crestron website as new
features are developed after product releases. Upgrade the firmware via
the Crestron Toolbox.
Check the Crestron website to find the latest firmware. (New users may
be required to register to obtain access to certain areas of the site,
including the FTP site.)
Upgrade C2N-MNETRPT firmware via Crestron Toolbox.
• Establish communications with the control system that is
connected to the C2N-MNETGW that has acquired the
C2N-MNETRPT. For instructions on establishing communications
with a control system, refer to the latest version of the 2-Series
Control Systems Reference Guide (Doc. 6256).
• Display the network device tree (Tools | Network Device Tree) to
show all network devices connected to the control system and all
infiNET devices that have been acquired by the C2N-MNETGW.
• Right click on the C2N-MNETRPT and select Functions |
Firmware… to upgrade the C2N-MNETRPT firmware.
For further details on upgrading, refer to the Crestron Toolbox help file.
12 • infiNET™ Repeater: C2N-MNETRPT Operations Guide – DOC. 6335A