Specifications

Crestron C2N-MNETRPT infiNET™ Repeater
Hardware Hookup
Make the necessary connections as called out in the illustration that
follows this paragraph. Apply power after all connections have been
made.
NOTE: Only Crestron power supplies should be used for Crestron
equipment.
Hardware Connections for the C2N-MNETRPT
ANTENNA:
FOR COMMUNICATION WITH
OTHER INFINET DEVICES
PWR, 12V @ 0.5A:
FROM INCLUDED
POWER SUPPLY
COM:
TO PC
(FOR FUTURE USE)
NOTE: To comply with FCC RF exposure compliance requirements,
the antenna used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-
located or operating in conjunction with any other antenna or transmitter.
For information of obtaining optimum reception, refer to “Appendix:
Optimum RF Reception Guidelines” on page 15.
Operations Guide – DOC. 6335A infiNET™ Repeater: C2N-MNETRPT • 9