Specifications

infiNET™ Repeater Crestron C2N-MNETRPT
Setup
Installation Tips
NOTE: The following should be used when the network is operating on
a fixed channel. If the network is automatically searching for a clear
channel, or the infiNET or Wi-Fi channels are not known, maintain at
least 12 feet between individual infiNET devices or 12 feet between
infiNET devices and Wi-Fi access points. For information on infiNET
channels, refer to the latest version of the C2N-MNETGW Operations
Guide (Doc. 6317) which is available for download from the Crestron
website (www.crestron.com/manuals
).
When installing an infiNET device, observe the following for optimum
performance:
• InfiNET devices on adjacent channels should be at least 12 feet
apart.
• InfiNET devices on non-adjacent channels should be at least three
feet apart.
When installing an infiNET device near a Wi-Fi access point, observe the
following for optimum performance:
• InfiNET devices on infiNET channels adjacent to operating Wi-Fi
channels should be placed at least 12 feet from the nearest Wi-Fi
access point.
• InfiNET devices on infiNET channels that are non-adjacent to
Wi-Fi bands should be located at least six feet from the nearest
Wi-Fi access point.
For additional information on optimal repeater placement, refer to
“Appendix: Optimum RF Reception Guidelines” on page 15. For more
information on infiNET channels and their interaction with the Wi-Fi
spectrum, refer to the latest version of the C2N-MNETGW Operations
Guide (Doc. 6317).
8 • infiNET™ Repeater: C2N-MNETRPT Operations Guide – DOC. 6335A