Specifications

infiNET™ Repeater Crestron C2N-MNETRPT
Connectors, Controls & Indicators (Continued)
# CONNECTORS,
CONTROLS &
INDICATORS
DESCRIPTION
3 MNET LED Indicates that the
C2N-MNETRPT is
communicating with the
C2N-MNETGW to which it was
acquired. For more information
on acquiring, refer to “Add
Repeater To infiNET Network”
on page 10.
4 SETUP
(LED and button)
Recessed pushbutton with red
LED;
Used to link the repeater to a
gateway.
5 COM
(Reserved for
future use.)
One 6-pin RJ-11 female
RS-232 PC console port. For
use with Crestron part number
STCP-502 or equivalent.
Pin 1: CTS
Pin 2: GND
Pin 3: RXD
Pin 4: TXD
Pin 5: RTS
Pin 6: N/C (Not connected)
6 PWR One 2.5 mm barrel DC power
jack. This port is used to
connect the included power
supply.
NOTE: Only the included power
supply should be used.
6 • infiNET™ Repeater: C2N-MNETRPT Operations Guide – DOC. 6335A