Crestron C2N-MNETRPT infiNET™ Repeater Operations Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2007 Crestron Electronics, Inc.
Crestron C2N-MNETRPT infiNET™ Repeater Contents InfiNET™ Repeater: C2N-MNETRPT 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Applications................................................................................................................. 2 Specifications ...................
Crestron C2N-MNETRPT infiNET™ Repeater InfiNET™ Repeater: C2N-MNETRPT Introduction Features and Functions • Two-way RF repeater ⇒ 2.4 GHz infiNET™ mesh network technology ⇒ Range up to 150 feet indoors, or 250 ft outdoors (subject to site-specific conditions) ⇒ Used to increase operating range of other infiNET devices • “Wi-Fi” friendly operating frequency selection to avoid interference The C2N-MNETRPT is a two-way RF repeater designed to extend the coverage of an infiNET wireless network.
infiNET™ Repeater Crestron C2N-MNETRPT reinforcing the complete network by providing multiple redundant signal paths within the mesh network. Simply adding more devices, or a C2N-MNETRPT repeater, effectively increases the range, strength, and reliability of the network. Easy Setup Setting up a complete infiNET network is simple, utilizing dynamic discovery to locate and acquire each device and repeater automatically.
Crestron C2N-MNETRPT infiNET™ Repeater Specifications Specifications for the C2N-MNETRPT are listed in the following table. C2N-MNETRPT Specifications SPECIFICATION RF Transceiver RF Transmitting Power Range (typical)1 Power Requirements Minimum 2-Series Control System Update File2, 3 Default MNET ID Enclosure Dimensions (without antenna) Height Width Depth Weight DETAILS Two-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.6 MHz), IEEE 802.15.
infiNET™ Repeater Crestron C2N-MNETRPT 2. The latest software versions can be obtained from the Crestron website. Refer to the NOTE following these footnotes. 3. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product Catalog for a complete list of 2-Series control systems. 4. “01” is not an addressable MNET ID number and is reserved for infiNET repeaters such as the C2N-MNETRPT. The MNET ID cannot be changed.
Crestron C2N-MNETRPT infiNET™ Repeater C2N-MNETRPT Overall Dimensions 1 2 3 4 5 6 Connectors, Controls & Indicators # CONNECTORS, CONTROLS & INDICATORS 1 ANTENNA DESCRIPTION Reverse SMA, female; Dipole antenna included. NOTE: Only the included antenna should be used. 2 PWR LED Indicates 12 Volts DC power supplied from the included power supply. (Continued on following page) Operations Guide – DOC.
infiNET™ Repeater Crestron C2N-MNETRPT Connectors, Controls & Indicators (Continued) # CONNECTORS, CONTROLS & INDICATORS DESCRIPTION 3 MNET LED 4 SETUP (LED and button) 5 COM (Reserved for future use.) 6 PWR Indicates that the C2N-MNETRPT is communicating with the C2N-MNETGW to which it was acquired. For more information on acquiring, refer to “Add Repeater To infiNET Network” on page 10. Recessed pushbutton with red LED; Used to link the repeater to a gateway.
Crestron C2N-MNETRPT infiNET™ Repeater Industry Compliance As of the date of manufacture the C2N-MNETRPT has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. FCC ID: EROCWD1012 NOTE: This device complies with part 15 of the FCC rules.
infiNET™ Repeater Crestron C2N-MNETRPT Setup Installation Tips NOTE: The following should be used when the network is operating on a fixed channel. If the network is automatically searching for a clear channel, or the infiNET or Wi-Fi channels are not known, maintain at least 12 feet between individual infiNET devices or 12 feet between infiNET devices and Wi-Fi access points. For information on infiNET channels, refer to the latest version of the C2N-MNETGW Operations Guide (Doc.
Crestron C2N-MNETRPT infiNET™ Repeater Hardware Hookup Make the necessary connections as called out in the illustration that follows this paragraph. Apply power after all connections have been made. NOTE: Only Crestron power supplies should be used for Crestron equipment. Hardware Connections for the C2N-MNETRPT ANTENNA: FOR COMMUNICATION WITH OTHER INFINET DEVICES COM: TO PC (FOR FUTURE USE) PWR, 12V @ 0.
infiNET™ Repeater Crestron C2N-MNETRPT Add Repeater To infiNET Network To add a repeater to an infiNET network, it must be “acquired” by a gateway that is connected to a Crestron control system. Perform the following to acquire a C2N-MNETRPT to a C2N-MNETGW: 1. Place the C2N-MNETGW that will communicate with the C2N-MNETRPT in the Acquire mode by pressing the ACQUIRE button or using Crestron Toolbox.
Crestron C2N-MNETRPT infiNET™ Repeater Utility Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website. To post a question or view questions you have submitted to Crestron’s True Blue Support, log in at http://support.crestron.com. First-time users will need to establish a user account.
infiNET™ Repeater Crestron C2N-MNETRPT Upgrading Firmware Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upgrade, the C2N-MNETRPT must be acquired by the C2N-MNETGW as described on page 10. Firmware upgrades are available from the Crestron website as new features are developed after product releases. Upgrade the firmware via the Crestron Toolbox.
Crestron C2N-MNETRPT infiNET™ Repeater Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. C2N-MNETRPT Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION PWR LED does not illuminate. C2N-MNETRPT is not receiving power. Verify that the included power supply is properly connected and providing power. Only use the included power supply.
infiNET™ Repeater Crestron C2N-MNETRPT This link will provide a list of product manuals arranged in alphabetical order by model number. List of Related Reference Documents DOCUMENT TITLE 2-Series Control Systems Reference Guide C2N-MNETGW Guide Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876].
Crestron C2N-MNETRPT infiNET™ Repeater Appendix: Optimum RF Reception Guidelines Many factors can affect the reliability of RF communication between infiNET gateways, repeaters, and devices. While an effort has been made to determine operating specifications, some specifications are not constant. RF communication can be limited by several factors including but not limited to electromagnetic interference (EMI), intervening objects, antenna orientation, and device placement.
infiNET™ Repeater Crestron C2N-MNETRPT enclosures will compromise RF propagation and reception. Try to avoid installing repeaters in equipment racks, service rooms, or electrical closets. To prevent unit-to-unit RF interference, multiple transceivers operating at the same frequencies should not be installed within three to five feet of each other. Antenna Orientation The antenna orientation on the C2N-MNETRPT can have considerable effect on the signal range and reliability.
Crestron C2N-MNETRPT infiNET™ Repeater If placing the antenna vertically causes it to lay parallel to a metal surface (i.e. a metal wall), the antenna should be oriented horizontally (perpendicular to the metal surface) as shown in the following diagram. Horizontal Orientation Antenna Metal Wall Operations Guide – DOC.
infiNET™ Repeater Crestron C2N-MNETRPT NOTE: RF propagation is best from the sides of the antenna. For specific information on where to place the C2N-MNETRPT, refer to “Repeater Placement” on page 15. 18 • infiNET™ Repeater: C2N-MNETRPT Operations Guide – DOC.
Crestron C2N-MNETRPT infiNET™ Repeater Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 6335A (2011953) 03.07 Specifications subject to change without notice.
