Specifications

Crestron C2N-MNETGW infiNET™ Gateway/Transceiver
Operations Guide – DOC. 6317B infiNET™ Gateway/Transceiver: C2N-MNETGW • 21
4. Place new infiNET devices in the Acquire mode as
described in their respective manuals. Devices will be
automatically acquired by the gateway approximately five
minutes after they enter the Acquire mode.
NOTE: If the acquired devices have never had an MNET
ID assigned, they will be acquired with the default MNET
ID 01.
5. At any time, click STOP Acquire to exit the Acquire mode.
The Acquire LED will turn off. Newly acquired devices
will be shown in addition to any existing devices.
Via the ACQUIRE Button:
1. Press ACQUIRE on the C2N-MNETGW to enter the
Acquire mode. The accompanying LED will illuminate
indicating that it is ready to link to infiNET devices.
NOTE: The Acquire mode will automatically deactivate
after 30 minutes.
2. Place the closest infiNET device in the Acquire mode as
described in its respective manual. (Once each device
acquires the gateway, it will function as a repeater to
reinforce the infiNET network.) The device will be
automatically acquired by the gateway within five minutes
after it enters the Acquire mode.
3. Repeat step 2 for each device to be acquired.
4. Press ACQUIRE on the C2N-MNETGW to exit the
Acquire mode. The LED will turn off.