Specifications

infiNET™ Gateway/Transceiver Crestron C2N-MNETGW
20 • infiNET™ Gateway/Transceiver: C2N-MNETGW Operations Guide – DOC. 6317B
C2N-MNETGW Controls
NOTE: If the C2N-MNETGW is already in the Acquire
mode, a message indicating the status will be displayed.
3. Click Start Acquire to place the C2N-MNETGW in the
Acquire mode.
The default time that the C2N-MNETGW remains in the
Acquire mode (when starting the Acquire mode from
Toolbox) is one hour. Other times can be specified from the
drop down button located next to the Start Acquire button.
The ACQUIRE LED on the C2N-MNETGW will
illuminate and the Start Acquire button will change to read
STOP Acquire.
NOTE: While the “C2N-MNETGW Controls” window is
open and the device is in the Acquire mode, the control
system is in passto mode. The program in the control system
is paused and will resume after leaving the Acquire mode.