Specifications

infiNET™ Gateway/Transceiver Crestron C2N-MNETGW
14 • infiNET™ Gateway/Transceiver: C2N-MNETGW Operations Guide – DOC. 6317B
• If necessary, double click a device to open the “Device Settings”
window and change the Net ID as shown in the following figure.
“C2N-MNETGW Device Settings” Window
• The ID code specified in the SIMPL Windows program must
match the Net ID of each unit. Refer to “Identity Code” on page 8.
Program
Manager
Program Manager is the view where programmers “program” a Crestron
control system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it
into Detail View. Each signal in the symbol is described in the SIMPL
Windows help file (F1).
The C2N-MNETGW does not require any specific programming other
than being included in the SIMPL Windows program.
Example Program
An example program for the C2N-MNETGW is available from the
Crestron website (http://www.crestron.com/exampleprograms
).