Crestron MLX-2 InfiNET EX™ LCD Handheld Remote Operations Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2009 Crestron Electronics, Inc.
Crestron MLX-2 infiNET EX™ LCD Handheld Remote Contents infiNET EX™ LCD Handheld Remote: MLX-2 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Specifications ..............................................................................................................
Crestron MLX-2 infiNET EX™ LCD Handheld Remote ™ infiNET EX LCD Handheld Remote: MLX-2 Introduction The MLX-2 is a state-of-the-art handheld remote featuring Crestron® infiNET EX™ 2-way RF wireless communications. Its backlit LCD screen is capable of displaying dynamic text with true feedback capability, supporting scrolling menus of channels, media titles, and numerous other commands.
infiNET EX™ LCD Handheld Remote Crestron MLX-2 Specifications Specifications for the MLX-2 are listed in the following table. MLX-2 Specifications SPECIFICATION LCD Screen DETAILS Monochrome 1.5 in (3.
Crestron MLX-2 infiNET EX™ LCD Handheld Remote Physical Description This section provides information on the connections, controls and indicators available on your MLX-2. MLX-2 Physical View Operations Guide – DOC.
infiNET EX™ LCD Handheld Remote Crestron MLX-2 MLX-2 Overall Dimensions 2.56 in (6.50 cm) 1 2 3 FCC ID: MG3-30700 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, And (2) this device must accept any interference received, including interference that may cause undesired operation. 4 IC: 2575A-30700 Model MLX 2 U.E.I. 9.18 in (23.30 cm) 5 6 1.11 in (2.
Crestron MLX-2 infiNET EX™ LCD Handheld Remote Industry Compliance As of the date of manufacture, the MLX-2 has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. Federal Communications Commission (FCC) Compliance Statement This device complies with part 15 of the FCC rules.
infiNET EX™ LCD Handheld Remote Crestron MLX-2 Setup Battery Installation Refer to the following illustration and install the four supplied AAA batteries. Battery Installation Identity Code The RF ID of the MLX-2 has been factory set to 03. The RF IDs of multiple MLX-2 devices communicating with the same gateway must be unique. RF IDs can be changed from the “Setup Mode” on page 7, or from a personal computer (PC) via the Crestron Toolbox™.
Crestron MLX-2 “PROGRAM DEVICE” Screen PROGRAM DEVICE infiNET EX™ LCD Handheld Remote In Setup mode, use the menu buttons on either side of the function name displayed on the “PROGRAM DEVICE” screen to select that function. BASIC SETUP The following paragraphs describe the setup options in the order listed in the menus.
infiNET EX™ LCD Handheld Remote Crestron MLX-2 If you press h in time, the display returns to the “PROGRAM DEVICE” screen. Otherwise, the display returns to the startup screen. “BASIC SETUP” Screen BASIC SETUP VERSION INFO CONTRAST DISPLAY T/O LIGHT T/O PAGE 1/1 BASIC SETUP Functions From the “PROGRAM DEVICE” screen, select BASIC SETUP.
Crestron MLX-2 infiNET EX™ LCD Handheld Remote Display Timeout From the “BASIC SETUP” screen, press one of the menu buttons on either side of the DISPLAY T/O menu option to select the display timeout setup function. This function sets the number of seconds of inactivity before the screen display is turned off (during normal operation, not in Setup mode). Display Timeout Setup -DISPLAY T/O+ SAVE - 5.0 + SAVE Display Timeout successfully adjusted. Press > to continue.
infiNET EX™ LCD Handheld Remote “VIEW TSID” Screen VIEW TSID 0x0034ad97 Crestron MLX-2 View TSID From the “PROGRAM DEVICE” screen, press one of the menu buttons on either side of the VIEW TSID option. The display shows the TSID number (32-bit number derived from the unit serial number). Press h to continue. The display returns to the “PROGRAM DEVICE” screen. Press > to continue.
Crestron MLX-2 RF Channel Screen To block a RF channel, press the key to the right of that channel in the following list. To unblock a channel, press the key to the left. Press > to Continue. infiNET EX™ LCD Handheld Remote RF Channel From the “PROGRAM DEVICE” screen, press one of the menu buttons on either side of the RF CHANNEL option. This option allows you to block or unblock the available channels. The display, shown to the left, provides basic instructions.
infiNET EX™ LCD Handheld Remote Crestron MLX-2 Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website. To post a question or view questions you have submitted to Crestron’s True Blue Support, log in at http://support.crestron.com. First-time users will need to establish a user account.
Crestron MLX-2 infiNET EX™ LCD Handheld Remote Locating the CEN-RFGW-EX in the Device Library Locating the MLX-2 in the Device Library • The system tree of the control system displays the device in the appropriate slot with a default RF ID as shown in the following illustration. C2Net Device, Slot 9 (Showing Cresnet Connection) Operations Guide – DOC.
infiNET EX™ LCD Handheld Remote Crestron MLX-2 • Additional MLX-2 devices are assigned different RF ID numbers as they are added. • If necessary, double click a device to open the “Device Settings” window and change the RF ID, as shown in the following figure. “Device Settings: Crestron MLX-2” Window • Program Manager The ID code specified in the SIMPL Windows program must match the RF ID of each unit. Refer to “Identity Code” on page 6.
Crestron MLX-2 infiNET EX™ LCD Handheld Remote Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade, it is necessary to establish communication. NOTE: Only firmware upgrades can be uploaded directly to the MLX-2. Firmware is loaded to the MLX-2 using the USB cable included in your MLX-2’s packaging.
infiNET EX™ LCD Handheld Remote Crestron MLX-2 Projects and Firmware Project or firmware files may be distributed from programmers to installers or from Crestron to dealers. Firmware upgrades are available from the Crestron website as new features are developed after product releases. One has the option to upload projects via the programming software or to upload and upgrade via the Crestron Toolbox.
Crestron MLX-2 infiNET EX™ LCD Handheld Remote Operation Operation of the MLX-2 is determined by the program developed for the system in which it is used. NOTE: To ensure best possible signal transmission during operation, avoid holding the MLX-2 in the area of the screen or resting the unit in the lap. The antenna is located at the rear of the unit, behind the screen, and is subject to interference from body parts. Operations Guide – DOC.
infiNET EX™ LCD Handheld Remote Crestron MLX-2 Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. MLX-2 Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION The MLX-2 does not function. Batteries are not installed properly, or need replacement. Check battery orientation. If necessary, install new batteries (polarity marked in compartment).
Crestron MLX-2 infiNET EX™ LCD Handheld Remote Cable Length Equation 40,000 L< RxP Where: L = Length of run (or chain) in feet R = 6 Ohms (Crestron Certified Wire: 18 AWG (0.75 MM 2 )) or 1.6 Ohms (Cresnet HP: 12 AWG (4 MM 2 )) P = Cresnet power usage of entire run (or chain) Make sure the cable length value is less than the value calculated on the right side of the equation.
infiNET EX™ LCD Handheld Remote Crestron MLX-2 Appendix: Firmware Upgrades NOTE: Only firmware upgrades can be uploaded directly to the MLX-2. Firmware is loaded to to the MLX-2 using the USB cable included in your MLX-2’s packaging Use Crestron Toolbox for communicating with the MLX-2; refer to the Crestron Toolbox help file for details.
Crestron MLX-2 infiNET EX™ LCD Handheld Remote Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
infiNET EX™ LCD Handheld Remote Crestron MLX-2 This page is intentionally left blank. 22 • infiNET EX™ LCD Handheld Remote: MLX-2 Operations Guide – DOC.
Crestron MLX-2 infiNET EX™ LCD Handheld Remote This page is intentionally left blank. Operations Guide – DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 6839A (2024479) 05.09 Specifications subject to change without notice.
