Specifications

Crestron MTX-3 Isys™ 2.8” Handheld WirelessTouchpanel
TPMC-3X-BTP in Battery Compartment of MTX-3
5. Re-attach the battery compartment cover.
Power
To charge its internal battery pack, the MTX-3 must be placed on the included
MTX-3-DS docking station/charger. Connect the included power pack to the
MTX-3-DS docking station/charger.
NOTE: Before using the MTX-3 for the first time, charge its internal battery for at
least two hours by placing on the MTX-3-DS docking station/charger. The green
LED on the front of the MTX-3 will blink while the battery is charging. Charging is
complete when the LED remains on without blinking.
It takes the MTX-3 about two hours to recharge while in use. A fully charged battery
can provide up to five hours of use at the full screen brightness setting.
The MTX-3 has a removable battery pack. With a properly maintained battery, the
design should retain 80% of its original capacity at 300 full charge and discharge
cycles. You may choose to replace your battery when it no longer holds sufficient
charge to meet your needs.
NOTE: When not using the MTX-3, store the unit on its docking station/charger.
Operations Guide – DOC. 7066B Isys™ 2.8” Handheld Wireless Touchpanel: MTX-3 • 11