Installation guide

InfiNET EX Wireless Gateway Crestron CEN-RFGW-EX

2 • infiNET EX Gateway: CEN-RFGW-EX Operations & Installation Guide – DOC. 6706G

• Up to 150 feet (46 meters) range indoors, 250 feet (76 meters)

outdoors

• Supports up to 100 infiNET EX devices and five expanders

• Supports up to six MLX-3 and MTX-3 handheld remotes

• Cresnet or Ethernet control system interface

• Single wire Cresnet or PoE network powered

• EMerge Alliance

compatible

Features and Functions

(Continued)

infiNET EX

Ultra-reliable infiNET EX wireless technology provides steadfast 2-way

RF communications throughout a residential or commercial structure

without the need for physical control wiring. Employing a 2.4 GHz mesh

network topology, nearly every infiNET EX device on the network

functions as an expander, passing command signals though to every other

device within range, approximately 150 feet (46 meters) indoors,

ensuring that every command reaches its intended destination without

disruption. Each infiNET EX device that is added to the network

effectively increases the range and stability of the entire network by

providing multiple redundant signal paths.

Easy Setup

Setting up a complete infiNET EX network is simple, utilizing dynamic

discovery to locate and acquire each RF device automatically. At all

times, the CEN-RFGW-EX monitors each device on the network,

ignoring any other 2.4 GHz signals and reconfiguring the entire network

automatically in response to new sources of interference and other

changes in RF conditions.

1. Battery powered infiNET EX devices do not provide extender functionality and

may have reduced RF range capabilities. Consult the specifications for each

network device to confirm its actual wireless capabilities.

2. A single infiNET EX gateway supports up to 100 wireless network devices

inclusive of up to six MLX-3 or MTX-3 remotes.