Installation guide

Crestron CEN-RFGW-EX infiNET EX Wireless Gateway
Operations & Installation Guide DOC. 6706G infiNET EX Gateway: CEN-RFGW-EX 15
Uploading and Upgrading
Crestron recommends using the latest programming software and that
each device contains the latest firmware to take advantage of the most
recently released features. However, before attempting to upload or
upgrade it is necessary to establish communication. Once communication
has been established, files (for example, programs or firmware) can be
transferred to the control system (or device). Finally, program checks can
be performed (such as changing the device ID or creating an IP table) to
ensure proper functioning.
NOTE: Crestron software and any files on the Web site are for
authorized Crestron dealers and Crestron Service Providers (CSPs) only.
New users must register to obtain access to certain areas of the site
(including the FTP site).
Establishing Communication
Use Crestron Toolbox for communicating with the CEN-RFGW-EX;
refer to the Crestron Toolbox help file for details. There are two methods
of communication: indirect and TCP/IP.
Indirect
Indirect Communication
PC Running
Crestron Toolbox
Serial,
or USB
LAN
Cresnet
Control
System
C OM PU TER
PWR
N ET
H W-R
SW-R
ACQUIRE
AC TIVITY
CEN-RFGW-EX
PWR
N ET
AC TIVITY
ACQUIRE
SETUP
CEN-RFGW-EX
LAN PoE
2W
N ET
G Z Y 24
CRESTRON
CEN-RFGW-EX connects to control system via Cresnet:
1. Click Tools | System Info.
2. Click the
icon.
3. For Connection Type, select Cresnet ID. In the Through
drop-down menu, select the control system.
4. Click OK. Communications are confirmed when the device
information is displayed.