Installation guide

InfiNET EX Wireless Gateway Crestron CEN-RFGW-EX
14 • infiNET EX Gateway: CEN-RFGW-EX Operations & Installation Guide – DOC. 6706G
Hardware Hookup
Make the necessary connections as called out in the illustrations that
follow this paragraph. Refer to “Network Wiring” on page 11 before
attaching the 4-position terminal block connector. Apply power after all
connections have been made.
NOTE: Power should be supplied through either the LAN PoE port or
the NET port but not both.
When making connections to the CEN-RFGW-EX, use Crestron power
supplies for Crestron equipment.
Hardware Connections for the CEN-RFGW-EX
(Top and Bottom Views)
Antenna:
For Included Antenna
LAN PoE:
10BASE-T / 100BASE-TX
Ethernet to LAN
NET:
To Control System and
Other Cresnet Devices
NOTE: Antenna must be attached directly to the antenna connector. It
can be extended with an optional ANT-EXT-5 or ANT-EXT-10 Antenna
Extender (both sold separately).
NOTE: Although both the LAN PoE and NET ports can be used for
configuration, there can only be one control connection to the control
system.