Installation guide

Crestron CEN-RFGW-EX infiNET EX Wireless Gateway

Operations & Installation Guide – DOC. 6706G infiNET EX Gateway: CEN-RFGW-EX • 11

Setup

Network Wiring

When wiring the Cresnet network, consider the following:

• Use Crestron Certified Wire.

• Use Crestron power supplies for Crestron equipment.

• Provide sufficient power to the system.

CAUTION: Insufficient power can lead to unpredictable results

or damage to the equipment. Please use the Crestron Power

Calculator to help calculate how much power is needed for the

system (

www.crestron.com/calculators).

For Cresnet networks with 20 or more devices, use a Cresnet

Hub/Repeater (CNXHUB) to maintain signal quality.

For more details, refer to “Check Network Wiring” on page 22.

The CEN-RFGW-EX can also use high-speed Ethernet for

communications between the device and a control system, computer,

media server and other IP-based devices.

For general information on connecting Ethernet devices in a Crestron

system, refer to the latest version of the Crestron e-Control



Reference

Guide (Doc. 6052), which is available from the Crestron Web site

(