Installation guide

infiNET EX Thermostat Crestron CHV-TSTATEX
34
•
infiNET EX Thermostat: CHV-TSTATEX Operations & Installation Guide – DOC. 6989C
Uploading and Upgrading
Crestron recommends using the latest programming software and that each device
contains the latest firmware to take advantage of the most recently released features.
However, before attempting to upload or upgrade it is necessary to establish
communication. Once communication has been established, files (for example,
programs or firmware) can be transferred to the control system (or device). Finally,
program checks can be performed (such as changing the device ID or creating an IP
table) to ensure proper functioning.
NOTE: Crestron software and any files on the website are for authorized Crestron
dealers and Crestron Service Providers (CSPs) only. New users must register to
obtain access to certain areas of the site (including the FTP site).
Establishing Communication
Use Crestron Toolbox for communicating with the CHV-TSTATEX; refer to the
Crestron Toolbox help file for details. There is a single method of communication:
indirect communication.
Indirect Communication
The CHV-TSTATEX connects to the CEN-RFGW-EX (gateway), which connects to
control system via Ethernet, or the CHV-TSTATEX connects directly to an MC3
Control System.
Establish communications between the PC and the control system as described in the
latest version of the 2-Series Control Systems Reference Guide (Doc. 6256). If
connecting to the MC3, refer to the latest version of the MC3 3-Series Control
System Operations Guide (Doc. 7095).
Programs and Firmware
Program or firmware files may be distributed from programmers to installers or from
Crestron to dealers. Firmware upgrades are available from the Crestron Web site as
new features are developed after product releases. One has the option to upload
programs via the programming software or to upload and upgrade via the Crestron
Toolbox. For details on uploading and upgrading, refer to the Crestron Studio help
file, the SIMPL Windows help file, or the Crestron Toolbox help file.
PC Running
Crestron Toolbox
Control
System
PWR
N ET
AC TIVITY
ACQUIRE
SETU P
C EN -R FG W-EX
LAN PoE
2W
N ET
G Z Y 24
CRESTRO N
LAN
Serial,
or USB
LAN
CHV-
TSTATEX
CEN-RFGW-EX