Installation guide

infiNET EX Thermostat Crestron CHV-TSTATEX

•

infiNET EX Thermostat: CHV-TSTATEX Operations & Installation Guide – DOC. 6989C

CAUTION: Excess wire pinched between the CHV-TSTATEX and

electrical box could cause a short circuit. Make sure that all excess wire is

completely inside the electrical box and not between the box and the

CHV-TSTATEX.

NOTE: To ensure accurate temperature readings, avoid drafts in the back

of the unit by plugging the wire hole with insulation.

4. Make sure unit is correctly oriented and place it in the electrical box.

5. Attach the CHV-TSTATEX rear plate to the electrical box using the two

included #06-32 x 1” pan head screws.

CAUTION: Do not press on the LCD display during mounting, as this may

cause the screen to crack.

6. Attach the front plate.

7. Carefully remove the warning label from the LCD display.

8. Insert batteries and attach the battery compartment cover.

CAUTION: Replace all batteries in the device at the same time. Mixing

old and new batteries in the device may result in battery leakage and

equipment damage.

NOTE: Crestron has provided small slots on either side of the battery

cover, designed to allow a flathead screwdriver to be inserted to assist in

removal.

9. Turn HVAC system power ON.

Installation into Electrical Box

Rear Plate

Screws

#06-32 x 1"

Battery

Compartment Cover

Screwdriver Slots

Front Plate