Installation guide

iMedia Wall Plate Control Panel Crestron IM-WCVP
Operation
The IM-WCVP can be used to turn a system on or off, select a source, or
adjust volume.
Turn on the
System
Press the PC button to turn on the system with the PC signals routed to
the iMedia receiver or press the VIDEO button to turn on the system
with the video signals routed to the iMedia receiver. The associated LED
will light to indicate the selected source.
Select a
Source
Press the PC button to route PC signals to the iMedia receiver or press
the VIDEO button to route video signals to the iMedia receiver The
associated LED will light to indicate the selected source.
Adjust Volume
Turn the volume knob clockwise to raise the volume of the selected
input; turn counterclockwise to lower the volume of the selected input.
Turn off the
System
Press and hold the selected source button for five seconds. The source
button LED will flash and then turn off.
10 • iMedia Wall Plate Control Panel: IM-WCVP Operations & Installation Guide – DOC. 6489