Installation guide

iMedia Wall Plate Computer & Video Center Interface Crestron IM-WCVI-M
2-Piece Wall Plate Multimedia Interface
The IM-WCCV-S-M is an iMedia (IM) transmitter featuring separate wall plates for
interface and control. The interface panel (IM-WCVI-M) is designed to install in a
standard 2-gang electrical box, providing video, RGB, and stereo audio inputs for
connection to the output of a computer or AV source. The control panel
(IM-WCVP-M) is a separate 1-gang wall plate, which may be installed up to 40 feet
from the interface panel.
Installing wiring for the IM-WCCV-S-M is extremely simple using CRESCAT-IM
cable. Up to three IM-WCCV-S-Ms, or other IM transmitters, may be installed as
part of a complete system to provide multiple input locations within the room.
Foolproof Operation
Every iMedia system is easy and intuitive to use. A simple press of the VIDEO or
PC buttons on the control panel selects the appropriate input, turns on the projector
(or plasma, etc.), lowers the screen or lift, and routes all the signals where they need
to go. The volume control affords easy adjustment of the audio level and the
microphone level (when connected to IM-RXV1-M or IM-RXV3-M). The entire
system can be turned off at any time by simply holding down either button for five
seconds.
For systems having more than one IM transmitter, selecting an input at a given input
location overrides the previously selected input at any other location. The audio level
for each input location is controlled individually by its respective volume control.
Application
The IM-WCVI-M is part of the IM-WCCV-S-M iMedia transmitter. As shown in the
following diagram, iMedia transmitters provide input points for video and PC
sources on an iMedia receiver.
2 • iMedia Wall Plate Interface: IM-WCVI-M Operations & Installation Guide – DOC. 6622A