Installation guide

iMedia Wall Plate Computer & Video Center Interface Crestron IM-WCVI-M
Hardware Hookup
Make the necessary connections as called out in the illustration that follows this
paragraph. Turn on the system only after all connections have been made.
Hardware Connections for the IM-WCVI-M (Rear)
TO IM-WCVP-M:
CRESCAT-IM
CONNECTION
TO IM-WCVP-M
TO IM-RXV
RECEIVER:
CONNECT TO
IMEDIA
RECEIVER
GROUND
NOTE: The IM-WCVI-M can be connected to the IM-RXV1, IM-RXV1-M,
IM-RXV3, and IM-RXV3-M iMedia receivers.
NOTE: For optimum performance, Crestron strongly recommends using
CRESCAT-IM cable, available from Crestron. Other high-quality/low skew
CAT5e/CAT6 wiring may also be used with varying performance.
NOTE: The maximum cable length between the IM-WCVP-M and the
IM-WCVI-M is 40 feet.
NOTE: Ensure that the unit is properly grounded.
Hardware Connections for the IM-WCVI-M (Front)
VIDEO:
CONNECT TO
COMPOSITE
VIDEO
SOURCE
AUDIO:
CONNECT TO
COMPOSITE
VIDEO
SOURCE
AUDIO
OUTPUT
PC:
CONNECT TO
COMPUTER
RGB OUTPUT
AUDIO:
CONNECT TO
COMPUTER
AUDIO
OUTPUT
10 • iMedia Wall Plate Interface: IM-WCVI-M Operations & Installation Guide – DOC. 6622A