Installation guide

Crestron IM-WCVP-M iMedia Wall Plate Control Panel
Setup
Network Wiring
When wiring the network, consider the following:
• Use Crestron Certified Wire.
• Use Crestron power supplies for Crestron equipment.
Installation
The IM-WCVP-M is designed to mount in a standard 2.5-inch (6.35 cm)
deep, single-gang, electrical box.
Required Tools:
• Phillips screwdriver
Mounting Parts Supplied with the IM-WCVP-M
PART DESCRIPTION QUANTITY
Screw #6-32 x 1 in, Pan Head, Phillips 2
Installation in a Single-Gang Electrical Box
NOTE: Run iMedia wire
through the top or
bottom of the
electrical box.
MOUNTING SCREWS
(2) #6-32 x 1"
2.5 in Depth, Single-Gang Electrical Box
CONNECT
TO GROUND
To prevent overheating, do not operate this product in an area that
exceeds the environmental temperature range listed in the table of
specifications. Contact with thermal insulating materials should be
avoided on all sides of the unit.
Operations & Installation Guide – DOC. 6623A Wall Plate Control Panel: IM-WCVP-M
• 9