Installation guide

Crestron IM-WCVP-M iMedia Wall Plate Control Panel
Connectors, Controls, & Indicators (Continued)
# CONNECTORS,
CONTROLS, &
INDICATORS
DESCRIPTION
5 TO IM-WCVI-M
2, 3
(1) 8-wire RJ-45 female;
Connects to IM input port of an iMedia
receiver via CresCAT-IM cable;
Maximum Cable Length: 40 ft
(12.2 m)
1. Ensure that the unit is properly grounded.
2. The eight-pin RJ-45 TO IM-WCVI-M port accepts CresCAT-IM carrying
control signals. Refer to the following table for connector pinouts.
PIN WIRE COLORS (EIA 568B)
1 WHITE/ORANGE
2 ORANGE
3 WHITE/GREEN
4 BLUE
5 WHITE/BLUE
6 GREEN
7 WHITE/BROWN
8 BROWN
3. To determine which is pin 1 on the cable, hold the cable so that the end of the
eight pin modular jack is facing away from you, with the clip down and copper
side up. Pin 1 is on the far left.
Operations & Installation Guide – DOC. 6623A Wall Plate Control Panel: IM-WCVP-M
• 7