Installation guide

Crestron IM-WCVI iMedia Wall Plate Computer Center with Video Interface
Connectors, Controls, & Indicators
# CONNECTORS,
CONTROLS, &
INDICATORS
DESCRIPTION
1 VIDEO
(1) RCA-type female connector for
composite video input.
2 AUDIO (R-L)
(1) Pair of RCA-type female connectors
for audio feed of composite video input.
3
TO IM-RXV
RECEIVER
(1) Female RJ-45 connector for iMedia
connection to IM-RXV1 or
IM-RXV3 receiver over CresCAT-IM
cable or other high-quality CAT5 wire.
For iMedia pin assignments, refer to the
chart on page 8.
4
TO IM-WCVP
CONTROL CENTER
Female RJ-45 port to connect to
IM-WCVP over CresCAT-IM wire or
other high-quality CAT5 wire (40 feet
maximum).
5 PC
(1) Female DB15HD connector is used
for connecting a computer’s RGB video
output to the display device.
The following table lists pin
assignments:
PIN FUNCTION PIN FUNCTION
1 Red Video 9
No Connect
2 Green Video 10
Ground
3 Blue Video 11
No Connect
4 Reserved 12
Monitor Sense
1
5 Ground 13
Horizontal Sync
6 Red Ground 14
Vertical Sync
7 Green Ground
8 Blue Ground
15
Monitor Sense
2
6 AUDIO (PC)
(1) 3.5mm female mini-jack connects to
audio output of PC.
7 GROUND WIRE Connect the flying lead to earth ground.
Operations & Installation Guide – DOC. 6488 iMedia Wall Plate Interface: IM-WCVI • 5