Installation guide

iMedia Wall Plate Computer & Video Center Crestron IM-WCCV
Connectors, Controls & Indicators (Continued)
# CONNECTORS,
CONTROLS &
INDICATORS
CONTROLS &
INDICATORS
DESCRIPTION DESCRIPTION
4 TO IM-RXV RECEIVER
(1) 8-wire female RJ-45 connector for iMedia
connection to IM-RXV1 or IM-RXV3 receiver
over CresCAT-IM cable
1
.
5 VIDEO
(1) RCA female, composite video input;
Input Impedance: 75 ohms;
Maximum Input: 1 V
p-p
6 AUDIO (R-L)
(2) RCA female; unbalanced stereo line-level
audio input (linked with VIDEO);
Maximum Input Level: 2 V
rms
;
Input Impedance: 10k ohms
7 PC
(1) DB15HD female, RGB (VGA) input;
Formats: RGBHV, RGBS, RGsB;
Input Impedance: 75 ohms;
Sync Impedance: 1k ohms;
Maximum Input Level: 1 Vp-p;
Maximum Sync Level: 5 Vp-p
2
8
AUDIO (PC)
(1) 3.5mm TRS mini phone jack;
Unbalanced stereo line-level audio input
(linked with PC);
Maximum Input Level: 2 Vrms;
Input Impedance: 10k ohms
9 GROUND WIRE Connect the flying lead to earth ground.
Pin 1
1. The eight-pin RJ-45 iMedia port accepts CresCAT-IM or CAT5E/CAT6 carrying video, audio, power
and control signals. Refer to the following table for connector pinouts. Power is supplied to pins 4 and
5 from the IM receivers.
PIN WIRE COLORS (EIA 568B)
iMEDIA ASSIGNMENT: RGB,
COMPOSITE AND AUDIO
1 WHITE/ORANGE
- RGB RED
2 ORANGE
+ RGB RED
3 WHITE/GREEN
- RGB GREEN
4 BLUE
+ AUDIO / POWER
5 WHITE/BLUE
- AUDIO / POWER
6 GREEN
+ RGB GREEN
7 WHITE/BROWN
- RGB BLUE / COMPOSITE
8 BROWN
+ RGB BLUE / COMPOSITE
6 • iMedia Wall Plate Computer & Video Center: IM-WCCV Operations & Installation Guide – DOC. 6540A